Quote Request – Torsion Springs (imperial)

Contact Info

Name *
Company
Address
Street AddressApt, Suite, Bldg. (optional)CityState / Province / RegionPostal / Zip CodeCountry
Phone *
Fax
Email *

Specifications

Quantity Required
Part #

To work over in. diameter shaft

Outside Diameter in.

+- in.

Inside Diameter in.

+- in.

Torque lb./in.

+- lb./in.

@ 01= degrees

Torque lb./in.

+- lb./in.

@ 01 degrees

Available Space (length) in.

Max. wound position (turns) turns

Max. wound position (degrees) degrees from free position

Movement arm length (R) in.

Helix Direction

Type of Ends
Short HookStraight OffsetDouble TorsionHingeStraight TorsionSpecial

Advisory Data

Wire Diameter *in.

Mean Coil Diameter in.

Number of Coils

Rate lb./in. per turn (360 degrees)

OF degree free angle reference

Special Information

Material Type *
Finish
Rotation Frequency
Other
Upload Drawing

Verification

Please enter any two digits *Example: 12
This box is for spam protection - <strong>please leave it blank</strong>:

WARNING: All springs are energy absorbing devices with a definite life cycle. They should be used with care and should not be used where failure would be hazardous.