Quote Request: Torsion Springs

Spring Type: Torsion
Units: metric imperial (Please select your preferred unit of measurement)

Name
Company
Address
City
Province/State
Postal/ZIP Code
Phone
Fax
E-mail
Website

Quantity Required
Part Number

Specifications

To work over: mm diameter shaft
Outside Diameter: mm or mm ± mm
Inside Diameter: mm or mm ± mm
Torque: N/mm ± N/mm @ O1= degrees; N/mm ± N/mm @ O1= degrees
Available Space (length): mm
Max. wound position: turns or degrees from free position
Movement arm length (R): mm
Helix Direction
Type of Ends: short hook
straight offset
double torsion
hinge
straight torsion
special

Advisory Data

Wire Diameter: mm
Mean Coil Diameter: mm
Number of Coils
Rate: N/mm per turn (360 degrees)
OF: degree free angle reference

Special Information

Material Type
Finish
Rotation Frequency
Other
Upload Drawing

© 2012 OmniCoil Spring Works Inc. 2009. Any production, reprinting or reproduction of this material in whole or in part without the express permission of Omnicoil Spring Works Inc. is prohibited. Warning: All springs are energy absorbing devices with a definite life cycle. They should be used with care and should not be used where failure would be hazardous.

Web site by Avocado Web Design in Brantford, Ontario